Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Inner Tube on the Piaggio Ciao - SI - Bravo - Garelli

Model: Piaggio Ciao

Video tutorial

In today's tutorial, we will see how to remove and replace the inner tube of the tyre on the Piaggio Ciao, as well as the SI, Bravo, and Garelli. First, place the central stand and start by removing the rear wheel; to do this, remove the plastic cover of the transmission and then disassemble the chain, as shown in the video.

At this point, unscrew the central nut to remove the rear wheel; deflate the tyre at the valve and use levers to remove and extract the inner tube. Finally, replace it with the new one and reassemble everything!


Updated on 5 June 2026 by ScegliAuto


Related tutorials

How to Replace the Tyre and Inner Tube of the Piaggio Ciao - Garelli
How to Replace the Tyre and Inner Tube of the Piaggio Ciao - Garelli
Ciao .. inner tube of the Piaggio Ciao, as well as the Si and Garelli models. First, put the central stand down and begin to remove the rear wheel; to do this,.. …
How to Install the Inner Tube and Tyre on the Piaggio Ciao - Si - Garelli
How to Install the Inner Tube and Tyre on the Piaggio Ciao - Si - Garelli
Ciao .. the rim of the Piaggio Ciao, as well as on the Si and Garelli. First, remove the wheel and take off the old tyre; ensure the rim is free of rust (if.. …
How to Change the Carburettor on the Piaggio Ciao, Bravo, Si, Garelli
How to Change the Carburettor on the Piaggio Ciao, Bravo, Si, Garelli
Ciao .. the Piaggio Ciao, as well as the Si, Bravo, and Garelli. First, put the central stand down and start by removing the plastic cover above the carburettor;.. …

How to Dismantle the Engine of a Piaggio Zip?

To dismantle the engine block of the Piaggio Zip, first extract it from its housing: once removed, you can proceed by loosening the screws that secure the side casing and also removing the spark plug from the top of the cylinder. This way, you can unscrew the bolts that secure it to its seat and then loosen the bolts that attach the connecting rod to the piston. By removing the piston itself, you can also dismantle the connecting rod and subsequently remove all other components located inside the engine block.

Watch the video!


by ScegliAuto

More videos