Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Piaggio Vespa GTS 300?

Model: Piaggio Vespa Gts 300
Part: Service warning light

Video tutorial

To reset the Service light on a Piaggio Vespa GTS 300, start by turning on the ignition by turning the key in the ignition switch; at this point, press and hold the lever to access the menu located on the left side of the handlebar. Keep this lever pressed for about ten seconds until the Service light starts to flash and then turns off completely; once the reset is complete, you can release the button and turn off the ignition.


Updated on 19 August 2026 by ScegliAuto


Related tutorials

How to Reset the Service on a Piaggio Vespa GTS 300 Scooter?
How to Reset the Service on a Piaggio Vespa GTS 300 Scooter?
Vespa Gts 300 As shown in this tutorial, resetting the service on a Piaggio Vespa GTS 300 scooter is an extremely simple and quick operation. Before proceeding, en…
How to Reset the Oil Service Light on a Piaggio Vespa GTS 300 Scooter?
How to Reset the Oil Service Light on a Piaggio Vespa GTS 300 Scooter?
Vespa Gts 300 In this tutorial, we will see how to reset the oil service light on a Piaggio Vespa GTS 300 scooter, an extremely simple and quick operation to be pe…
How to reset the service light on the Vespa GTS 300
How to reset the service light on the Vespa GTS 300
Vespa Gts 300 If you want to manually reset the service light on the central display of your Vespa GTS 300, all you have to do is read the following guide and foll…

How to Change the Engine Oil in the Suzuki GSX-S1000?

Changing the engine oil in the Suzuki GSX-S1000, as shown in this tutorial, is an extremely simple and quick operation. First, ensure that the engine is sufficiently cool, then position a container underneath and remove the lower fairing. Next, locate the drain hole bolt, unscrew it using a socket spanner, and allow all the oil in the system to drain out. At this point, simply unscrew the old filter, tighten both the replacement and the bolt, and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos