|
Do it yourself
| |||
| ||||
Model: Piaggio Zip
To replace the fork of the Piaggio Zip, first loosen the nuts securing the central axle of the front wheel, allowing it to be removed from its housing by pulling out the axle. Once the wheel is removed, you can loosen the screws securing the fork to the central steering part, then completely detach it by tapping the horizontal bar upwards. After removing the old fork, insert the new one, securing it in place and ensuring everything functions correctly.
Updated on 17 September 2026 by ScegliAuto
Video tutorial
Related tutorials
Zip
You can replace the fork on the Piaggio Zip by loosening the screws that secure the front panel of the scooter and also those that secure the front w…
Zip
To remove the speed sensor from the Piaggio Zip, loosen the screws that secure the two side nuts of the front wheel, allowing it to be detached from …
Zip
Follow these instructions to remove and replace the battery of the Piaggio Zip scooter by following these simple steps. First, place your scooter on …
|
How to Remove the Engine from a KTM EXC 300?
To remove the engine from the KTM EXC 300, you need to take out the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is removed, unscrew the bolts that secure the cylinder at the top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. The necessary parts can now be replaced, and you can subsequently reassemble all the components that were removed earlier. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.336
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
