Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
A useful accessory to fit on a Piaggio Vespa 50 Special is the spare wheel. First, obtain a rim, which you can find used and restore yourself, along with an inner tube and a tyre. Assemble everything to have your spare wheel ready. Now, move on to fitting the support: remove the rubber caps covering the holes on the central tunnel, check the threads, and restore them if necessary using an M8 tap. Fit the support using the supplied screws, place a washer on the top screw, and secure it with its nut. You can then mount the spare wheel, securing it with the provided nuts, and complete the job by fitting the custom wheel cover.

Updated on 19 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the wheel and tyre from the Piaggio Vespa 50 Special
How to remove the wheel and tyre from the Piaggio Vespa 50 Special
Vespa 50 Special Today's video will show you how to remove and replace the wheel or tyre of the Piaggio Vespa 50 Special, as well as the Vespa PK 50 and PX 125. First…
How to Replace the Clutch Cable on the Piaggio Vespa 50 Special?
How to Replace the Clutch Cable on the Piaggio Vespa 50 Special?
Vespa 50 Special To replace the clutch cable on the Piaggio Vespa 50 Special, loosen the bolts securing it near the rear wheel on the right side of the scooter. Once …
How to Remove the Flywheel from the Piaggio Vespa 50 Special
How to Remove the Flywheel from the Piaggio Vespa 50 Special
Vespa 50 Special In this tutorial, we will go through the steps to remove and replace the flywheel of the classic Piaggio Vespa 50 Special. First, place the central s…

How to Replace the Tyres on the Husaberg FE 450

In this guide, follow the instructions to remove and replace the tyres on the Husaberg FE 450 enduro bike. First, place the bike on a stand and lift the wheel off the ground; then, undo the bolts securing the brake caliper to remove it, as shown in the video. Next, unscrew the central axle of the wheel, removing the tyre from the rim (deflating it and using levers); then install the new tyre, ensuring it has the correct dimensions, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos