Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to turn on the lights of the Piaggio Vespa GTS 125, you do not need to press any buttons, as it will be enough to start the vehicle for the low beam headlight and position lights to come on. By pressing the button on the left side of the handlebar, it will be possible to also turn on the high beams; it may also happen that the vehicle's battery is not sufficiently charged and therefore it is not possible to start the engine. To solve the problem, you can turn off the low beams by pressing the button repeatedly to the right until you hear a click.

Posted on 7 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the rear shock absorber of the Piaggio Vespa GTS 125
How to adjust the rear shock absorber of the Piaggio Vespa GTS 125
Vespa Gts 125 Below we will see the instructions that will allow us to adjust the stiffness of the rear suspension of the Piaggio Vespa GTS 125 scooter, but also o…
Where are the fuses located on the Piaggio Vespa GTS 125?
Where are the fuses located on the Piaggio Vespa GTS 125?
Vespa Gts 125 The fuses of the Piaggio Vespa GTS 125 are located inside the front fairing of the scooter: to access the fuse box, press the ignition switch fully. …
How to Replace the Front Indicator Bulb on the Piaggio Vespa GTS 125
How to Replace the Front Indicator Bulb on the Piaggio Vespa GTS 125
Vespa Gts 125 To replace the front indicator bulb on the Piaggio Vespa GTS 125, loosen the screw located at the bottom of the headlamp assembly. Once this screw is…

How to Change the Engine Oil in the Harley-Davidson Iron 883?

In this tutorial, you will learn how to change the engine oil in the Harley-Davidson Iron 883, a very simple and quick operation to perform every 12 months. First, wait for the engine to cool down, then open the filler cap located on the upper right side, disconnect the drain hose, and remove the plug by loosening the corresponding metal clamp. Once all the oil has drained from the system, replace the plug and proceed with changing the filter, which is located on the front of the engine. Finally, add new oil through the filler hole.

Watch the video!


by ScegliAuto

More videos