Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Levers on a Piaggio Vespa GTS 300?

Model: Piaggio Vespa Gts 300
Part:

Video tutorial
Detailed instructions - To replace the levers on a Piaggio Vespa GTS 300, loosen the screws securing the front panel of the scooter and remove it completely. Once the panel is removed, proceed to loosen the screws that secure the levers in their housings on the sides of the handlebars, disconnecting the cables connected to the levers as well. When these are fully released, loosen the screws that secure the cables so you can connect the new ones. After installation, refit the front fairing.

Updated on 7 October 2026 by ScegliAuto


Related tutorials

How to Replace the Wing Mirror on a Piaggio Vespa GTS 300?
How to Replace the Wing Mirror on a Piaggio Vespa GTS 300?
Vespa Gts 300 To replace the wing mirror on a Piaggio Vespa GTS 300, grasp the mirror and rotate it anti-clockwise. This will free it from its housing, allowing yo…
How to Replace the Exhaust on a Piaggio Vespa GTS 300
How to Replace the Exhaust on a Piaggio Vespa GTS 300
Vespa Gts 300 To replace the exhaust on a Piaggio Vespa GTS 300, you need to loosen the screws that secure it to its housing on the right side of the scooter, near…
How to reset the service light on the Vespa GTS 300
How to reset the service light on the Vespa GTS 300
Vespa Gts 300 If you want to manually reset the service light on the central display of your Vespa GTS 300, all you have to do is read the following guide and foll…

How to Replace the Air Filter on a Yamaha FZ6

In this tutorial, you will see how to replace the air filter on a Yamaha FZ6, a very simple and quick operation. To do this, you will need a set of Allen keys and a flat-head screwdriver. First, remove the seat, then unclip the two indicated plastic inserts, unscrew the front bolts of the tank, and lift it. Next, unscrew the fixing screws of the upper half of the airbox, open it, and extract the old filter. At this point, clean the inside of the housing from any residue, insert the replacement in the correct orientation, and reassemble everything.

Watch the video!


by ScegliAuto

More videos