Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on the Piaggio Vespa Sprint 150

Model: Piaggio Vespa Sprint 150
Part: Battery

Video tutorial

To replace the battery on the Piaggio Vespa Sprint 150, you need to loosen the screws that secure the panel in the centre of the footwell: this panel must be removed by loosening the screws that hold it. This will allow access to the battery underneath, which can be freed from its housing by unscrewing the screws and disconnecting the power cables; after the old battery has been removed, you can insert the new one. The new battery must now be secured with the appropriate screws and the power cables connected.


Updated on 16 October 2026 by ScegliAuto


Related tutorials

How do you replace the battery of the Piaggio Vespa Sprint 150?
How do you replace the battery of the Piaggio Vespa Sprint 150?
Vespa Sprint 150 To replace the battery on the Piaggio Vespa Sprint 150, you need to loosen the four T25 screws that secure the panel in the center of the footrest co…
How to Replace the Engine Oil of the Piaggio Vespa Sprint 150?
How to Replace the Engine Oil of the Piaggio Vespa Sprint 150?
Vespa Sprint 150 To replace the engine oil on the Piaggio Vespa Sprint 150, loosen the drain plug located at the central lower area of the vehicle. Once the plug is l…
How do you replace the air filter of the Piaggio Vespa Sprint 150?
How do you replace the air filter of the Piaggio Vespa Sprint 150?
Vespa Sprint 150 The air filter of the Piaggio Vespa Sprint 150 can be replaced by loosening the screws that secure the filter box near the rear wheel, on the left si…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos