Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Porsche
    3. :
  3. Cayenne
    4. : Front bumper

Porsche Cayenne - Front bumper

Porsche Cayenne (2010-2017 / MK 2)
How to remove the front bumper of a Porsche Cayenne.
Today we will explain how to easily remove the front bumper of a Porsche Cayenne, model produced from 2010 to 2017. The first thing to do is to open the engine …read all…
Posted on 24 September 2023 by ScegliAuto
Porsche Cayenne (2003-2010 / MK 1)
How to remove rear bumper on Porsche Cayenne
Replacing the rear bumper of a Porsche Cayenne, how to remove it. With a screwdriver or cordless screwdriver unscrew the locking pins located in the rear part …read all…
Posted on 2 December 2023 by ScegliAuto
Airbags (1) Car stereo (1) Battery (6) Bodywork (1) Key (10) -board computer (2) Checks and maintenance (6) Headlight (6) Tail light (5) Fog lights (1) Air filter (1) Cabin air filter (1) Injectors (1) Accessory Kit (1) Headlight bulb (2) Handle (1) Door panel (1) Windshield (1) Front bumper (2) Rear bumper (1) Brake pads (2) Hydraulic pistons (3) Tires (3) Door (1) Window lift button (1) Wheel (1) Fuse box (10) Seat (1) Windscreen wipers (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos