Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Porsche Cayenne - Tires

Porsche Cayenne (2003-2010 / MK 1)
How to reset the tire pressure warning light in the Porsche Cayenne?
In this tutorial we can see how to reset the tire pressure warning light in the Porsche Cayenne, a very simple and quick operation. Before proceeding, we must …read all…
Posted on 20 February 2024 by ScegliAuto
Porsche Cayenne (2003-2010 / MK 1)
How to remove the tire pressure warning light on the Porsche Cayenne?
In this tutorial, we can see how to reset the tire pressure warning light in the Porsche Cayenne, a very simple and quick operation to be carried out only …read all…
Posted on 22 April 2023 by ScegliAuto
Porsche Cayenne (2010-2017 / MK 2)
How to replace a flat tire on the Porsche Cayenne
The guide shows you how to replace a flat tire on the Porsche Cayenne. The first operation to perform is to lift the vehicle, using the appropriate jack and …read all…
Posted on 4 March 2024 by ScegliAuto
Airbags (1) Car stereo (1) Battery (6) Bodywork (1) Key (10) -board computer (2) Checks and maintenance (6) Headlight (6) Tail light (5) Fog lights (1) Air filter (1) Cabin air filter (1) Injectors (1) Accessory Kit (1) Headlight bulb (2) Handle (1) Door panel (1) Windshield (1) Front bumper (2) Rear bumper (1) Brake pads (2) Hydraulic pistons (3) Tires (3) Door (1) Window lift button (1) Wheel (1) Fuse box (10) Seat (1) Windscreen wipers (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos