Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Porsche
    3. :
  3. Cayenne
    4. : Hydraulic pistons

Porsche Cayenne - Hydraulic pistons

Porsche Cayenne (2003-2010 / MK 1)
Cayenne tailgate pistons replacement
We open the tailgate of the car, then, with a plastic lever, remove the upper side trim of the trunk with attached clips. Using a screwdriver, unscrew the …read all…
Posted on 5 December 2023 by ScegliAuto
Porsche Cayenne (2003-2010 / MK 1)
How to remove the pistons of the tailgate opening of a Porsche Cayenne
Let's see in this video how to remove the pistons of the tailgate opening of a Porsche Cayenne. To begin with: we open the tailgate of the car, then, with a …read all…
Posted on 11 October 2023 by ScegliAuto
Porsche Cayenne (2003-2010 / MK 1)
How to replace the piston of the trunk lid of the Porsche Cayenne
To carry out this replacement it will be necessary to remove the corner protections and the one above the edge with the tailgate, just pull them towards you to …read all…
Posted on 26 September 2023 by ScegliAuto
Airbags (1) Car stereo (1) Battery (6) Bodywork (1) Key (10) -board computer (2) Checks and maintenance (6) Headlight (6) Tail light (5) Fog lights (1) Air filter (1) Cabin air filter (1) Injectors (1) Accessory Kit (1) Headlight bulb (2) Handle (1) Door panel (1) Windshield (1) Front bumper (2) Rear bumper (1) Brake pads (2) Hydraulic pistons (3) Tires (3) Door (1) Window lift button (1) Wheel (1) Fuse box (10) Seat (1) Windscreen wipers (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos