Do it yourself
| ||||
|
Porsche Cayenne - Tail light
Porsche Cayenne (2017-2024 / MK 3)
How to replace the rear taillight of the Porsche Cayenne. Today's instructions will show us the steps on how to disassemble and replace the rear taillight and its bulbs of the Porsche Cayenne. First, let's move to the …read all… Posted on 18 November 2023 by ScegliAuto
Porsche Cayenne (2010-2017 / MK 2)
Replacement of the rear lights of the Porsche Cayenne Let's see below the step-by-step instructions that will allow us to disassemble and replace the rear lights of the Porsche Cayenne. First, open the rear trunk …read all… Posted on 18 November 2023 by ScegliAuto
Porsche Cayenne (2010-2017 / MK 2)
How to replace the rear light on the Porsche Cayenne If we want to proceed with the replacement of the rear light on this car model we will find useful information on how to move in the description below and in …read all… Posted on 22 June 2022 by ScegliAuto
Porsche Cayenne (2003-2010 / MK 1)
How to replace the rear light bulbs on the Porsche Cayenne Mk1 The guide shows you how to replace the brake bulbs on the Porsche Cayenne Mk1. The first operation to perform is to open the rear door of the machine and …read all… Posted on 13 June 2022 by ScegliAuto
Porsche Cayenne (2003-2010 / MK 1)
Rear light disassembly instructions Removing the rear light is extremely simple and requires no special experience or special tools. In fact, it is sufficient to open the rear bonnet and unscrew …read all… Posted on 1 August 2023 by ScegliAuto Airbags (1) Car stereo (1) Battery (6) Bodywork (1) Key (10) -board computer (2) Checks and maintenance (6) Headlight (6) Tail light (5) Fog lights (1) Air filter (1) Cabin air filter (1) Injectors (1) Accessory Kit (1) Headlight bulb (2) Handle (1) Door panel (1) Windshield (1) Front bumper (2) Rear bumper (1) Brake pads (2) Hydraulic pistons (3) Tires (3) Door (1) Window lift button (1) Wheel (1) Fuse box (10) Seat (1) Windscreen wipers (3) |
Handbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |