Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlight on the Porsche Cayenne

Model: Porsche Cayenne MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Tail light

See other generations:
Video tutorial

To replace the rear headlight on this vehicle model, find the useful information on how to proceed in the description below and in the video. Once you open the trunk, locate the 2 clips on the inner side of the light assembly that need to be removed with a plastic lever.

Underneath, you will find the screws that must be unscrewed to pull the headlight out towards you. Then, disconnect the electrical connector located behind, and at this point, you can proceed to install the new light assembly in place of the old one.


Updated on 29 May 2026 by ScegliAuto


Related tutorials

How to Remove the Front Headlight of a Porsche Cayenne
How to Remove the Front Headlight of a Porsche Cayenne
Porsche Cayenne (2003-2010 / MK 1) Before starting, open the hood of your Porsche Cayenne. Begin by prying off and removing the bolt cover that secures the headlight to the frame. Next…
Where to Find the Fuse Box of the 2020 Porsche Cayenne
Where to Find the Fuse Box of the 2020 Porsche Cayenne
Porsche Cayenne (2017-2026 / MK 3) Before you can work on the fuses of your 2020 Porsche Cayenne (third generation), you need to locate them safely, and this guide will help you do jus…
Where to Find the Fuse Box of the Porsche Cayenne 2
Where to Find the Fuse Box of the Porsche Cayenne 2
Porsche Cayenne (2010-2017 / MK 2) If you don't know where all the various fuses are located in your Porsche Cayenne second generation, don't worry because this guide provides all the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos