Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Porsche
    3. :
  3. Cayenne
    4. : How to replace the rear light bulbs on the Porsche Cayenne Mk1

Porsche Cayenne - Video tutorial

Model: Porsche Cayenne MK 1 - Years 2003-2010
Part: Tail light
Operation: How to replace the rear light bulbs on the Porsche Cayenne Mk1

The guide shows you how to replace the brake bulbs on the Porsche Cayenne Mk1. The first operation to perform is to open the rear door of the machine and remove the two protective plastic covers of the two Torx T27 lamp fixing screws. At this point it is possible to extract the light assembly and disconnect the electrical connector. Unscrew the fixing bolts of the lamp holder and replace the bulbs which are held in place by a bayonet fitting. Reassemble everything in position and check the correct functioning of the light.


Posted on 31 May 2024 by ScegliAuto



How to remove the headlight of a Porsche Cayenne
Porsche Cayenne (2003-2010 / MK 1) Before we begin, we will have to open the front hood of our Porsche Cayenne. Let's start then by going to disengage and remove the cover of the bolt
How to replace the rear taillight of the Porsche Cayenne.
Porsche Cayenne (2017-2024 / MK 3) Today's instructions will show us the steps on how to disassemble and replace the rear taillight and its bulbs of the Porsche Cayenne. First, let's m
How to remove the front headlight of the Porsche Cayenne.
Porsche Cayenne (2003-2010 / MK 1) In this guide, we will see the main instructions to disassemble and replace the front light of the Porsche Cayenne in simple and quick steps. First,

How do you replace the horn on the Citroà «n Berlingo?

In order to replace the horn on the Citroà «n Berlingo, the vehicle must be raised so that the screws that secure the left front wheel can be loosened and removed completely. Once this wheel has been removed, it will be possible to access the screws that secure the internal cover of the corresponding wheel arch: this will have to be detached and it will be possible to access the components inside, including the horn. This will need to be disconnected from its connector and removed from its holders, so that it can be replaced with a new spare part.

Watch the video!


by ScegliAuto

More videos