Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Porsche
    3. :
  3. Cayenne
    4. : How to replace the front daytime running lights on the Porsche Cayenne

Porsche Cayenne - Video tutorial

Model: Porsche Cayenne MK 1 - Years 2003-2010
Part: Headlight bulb
Operation: How to replace the front daytime running lights on the Porsche Cayenne

Let's see in this short guide the main instructions that will allow us to disassemble and replace the daytime running lights of the Porsche Cayenne. First of all, let's move to the front of our car and start removing the front wheel arch; to do this, unscrew the fixing screws, using a screwdriver or torx wrench, as shown in the video. At this point we remove the protective cover of the bulbs and disconnect the connector together with the position light bulb (of the bulb type); let's replace it with the new one and reassemble everything, applying the reverse procedure!


Posted on 21 May 2024 by ScegliAuto



How to remove the headlight of a Porsche Cayenne
Porsche Cayenne (2003-2010 / MK 1) Before we begin, we will have to open the front hood of our Porsche Cayenne. Let's start then by going to disengage and remove the cover of the bolt
Where are the fuses located in the Porsche Cayenne?
Porsche Cayenne (2017-2024 / MK 3) The fuses of the Porsche Cayenne are divided into the appropriate fuse boxes that are installed in the vehicle: in this type of car, it is possible t
Where are the fuses located in the Porsche Cayenne?
Porsche Cayenne (2003-2010 / MK 1) The fuses of the Porsche Cayenne are located inside the appropriate fuse boxes that are installed on the vehicle: in this type of car, it is possible

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos