Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Porsche
    3. :
  3. 911
    4. : How to remove the wheels of the Porsche 911 GT3 RS

Porsche 911 - Video tutorial

Model: Porsche 911 991 - Years 2011-2019
Part: Wheel
Operation: How to remove the wheels of the Porsche 911 GT3 RS

Open the front hood to take the adapter located under the plastic bulkhead. At this point, insert the adapter into the wheel hub and use a ratchet wrench of appropriate size to lever vigorously to unscrew it; now you can place the jack under the wheel and raise the car to remove the wheel. Once the rubber has been replaced or repaired, you can proceed with reassembly by first screwing the central nut by hand and then with the ratchet wrench (always use its adapter). Once the wheel is well positioned and tightened, you can lower the car and remove the jack. Carry out the same operations for the other wheels.


Posted on 17 November 2023 by ScegliAuto



How to replace the key battery of a Porsche 911
Porsche 911 (1997-2005 / 996) Let's start by inserting the tip of a small slotted screwdriver inside the key of our Porsche 911, and then leverage. By doing so, we will have reach
Where is the fuse box of the Porsche 911 2022 located?
Porsche 911 (2019-2024 / 992) If you own the beautiful 2022 Porsche 911 and don't know where the box containing all the various fuses of the car is located, don't worry because th
How to replace the speedometer in the Porsche 911?
Porsche 911 (1995-1998 / 993) In this tutorial, we can see how to disassemble the speedometer in the Porsche 911, an extremely simple and fast operation. First of all, make sure t

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos