Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Wheel from a Porsche 911

Model: Porsche 911 997 - Years 2005-2011
Part: Wheel

In this simple operation, you will need to gather the tools required for the job, which are located under the upper panel in the trunk. Lift the side of the vehicle where the wheel needs to be replaced. This way, you can proceed to remove the cap covering the central bolt. Now, using the appropriate tool, loosen the bolt and remove the wheel itself. Then, install the new wheel and retrace the steps described for reassembling the various components.

Updated on 27 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Porsche 911 (2005-2011 / 997) To replace the windshield washer fluid reservoir on a Porsche 911, lift the car with a jack so that the front left wheel is not in contact with the g…
Porsche 911 (1997-2005 / 996) In this brief guide, discover the steps to remove and replace the windshield washer fluid reservoir on the Porsche 911. First, lift the vehicle and b…
Porsche 911 (1997-2005 / 996) Start by inserting the tip of a small flathead screwdriver into the key of your Porsche 911 and prying it open. This will expose the dead battery. Pr…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos