Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Speedometer on a Porsche 911?

Model: Porsche 911 993 - Years: 1995, 1996, 1997, 1998
Part: Instrument cluster

See other generations:
Video tutorial

In this tutorial, you will see how to remove the speedometer on a Porsche 911, a very simple and quick operation. First, ensure that the key is not inserted for safety.

Then, pry along the perimeter of the speedometer using a plastic trim tool to avoid leaving any marks on the instrument panel. Next, pull the unit out of its housing, disconnect the internal connector, and proceed with replacing the faulty component.

To reassemble, simply follow the reverse procedure.


Updated on 21 August 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery of a Porsche 911
How to Replace the Key Battery of a Porsche 911
Porsche 911 (1997-2005 / 996) Start by inserting the tip of a small flathead screwdriver into the key of your Porsche 911 and prying it open. This will expose the dead battery. Pr…
Where to Find the Fuse Box of the 2022 Porsche 911
Where to Find the Fuse Box of the 2022 Porsche 911
Porsche 911 (2019-2026 / 992) If you own the beautiful 2022 Porsche 911 and don't know where the fuse box is located, don't worry because with the procedure described below, you w…
How to Replace the Key Fob Battery for the Porsche 911?
How to Replace the Key Fob Battery for the Porsche 911?
Porsche 911 (2011-2019 / 991) To replace the key fob battery for the Porsche 911, pull out the key located inside the device from the top. Once removed, pry off the circular cover…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos