Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Porsche
    3. :
  3. 911
    4. : Instrument cluster

Porsche 911 - Instrument cluster

Porsche 911 (2011-2019 / 991)
How to remove the odometer on the Porsche 911 (993)
In this video we see how to remove the odometer from the instrument panel of a Porsche 911: first of all we will need a plastic spatula to pry from the bottom …read all…
Posted on 11 May 2024 by ScegliAuto
Porsche 911 (1995-1998 / 993)
How to replace the speedometer in the Porsche 911?
In this tutorial, we can see how to disassemble the speedometer in the Porsche 911, an extremely simple and fast operation. First of all, make sure that the …read all…
Posted on 8 October 2023 by ScegliAuto
Porsche 911 (1997-2005 / 996)
Disassembly odometer on Porsche 911
Let's see how to disassemble the instrument panel of a Porsche 911. Remove the frame of the triangle button, unscrew the screws placed in the plastics of the …read all…
Posted on 4 January 2024 by ScegliAuto
Battery (3) Coil (1) Arm (2) Gearbox (1) Spark plugs (3) Soft top (2) Bodywork (2) Key (5) V-belt (1) Checks and maintenance (5) Dashboard (1) Bearing (1) Brake discs (6) Headlight (6) Tail light (1) Air filter (1) Cabin air filter (3) Oil filter (1) Accessory Kit (3) Headlight bulb (1) Interior lights ceiling light bulb (1) Antifreeze liquid (2) Muffler (1) Engine (3) Starter motor (2) Gear oil (1) Engine oil (8) Door panel (5) Front bumper (5) Rear bumper (3) Brake pads (1) Hydraulic pistons (1) Gear Shift Knob (1) Pump (3) Fuel pump (2) Instrument cluster (3) Radiator (2) Wheel (3) Fuse box (3) Seat (1) Outside rearview mirror (2) Windscreen wipers (3) Central tunnel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos