Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Porsche
    3. :
  3. 911
    4. : Fuse box

Porsche 911 - Fuse box

Porsche 911 (2019-2024 / 992)
Where is the fuse box of the Porsche 911 2022 located?
If you own the beautiful 2022 Porsche 911 and don't know where the box containing all the various fuses of the car is located, don't worry because thanks to …read all…
Posted on 19 May 2024 by ScegliAuto
Porsche 911 (1997-2005 / 996)
Where are the fuses of the Porsche 911 located?
The fuses of the Porsche 911 are located inside the appropriate fuse boxes that are present in the vehicle: in this type of vehicle, it will be possible to …read all…
Posted on 3 February 2024 by ScegliAuto
Porsche 911 (2011-2019 / 991)
Where are the fuses located in the Porsche 911?
The fuses of the Porsche 911 are located inside the appropriate fuse boxes that are installed in the car: in this car model, it is possible to find two boxes …read all…
Posted on 1 January 2024 by ScegliAuto
Battery (3) Coil (1) Arm (2) Gearbox (1) Spark plugs (3) Soft top (2) Bodywork (2) Key (5) V-belt (1) Checks and maintenance (5) Dashboard (1) Bearing (1) Brake discs (6) Headlight (6) Tail light (1) Air filter (1) Cabin air filter (3) Oil filter (1) Accessory Kit (3) Headlight bulb (1) Interior lights ceiling light bulb (1) Antifreeze liquid (2) Muffler (1) Engine (3) Starter motor (2) Gear oil (1) Engine oil (8) Door panel (5) Front bumper (5) Rear bumper (3) Brake pads (1) Hydraulic pistons (1) Gear Shift Knob (1) Pump (3) Fuel pump (2) Instrument cluster (3) Radiator (2) Wheel (3) Fuse box (3) Seat (1) Outside rearview mirror (2) Windscreen wipers (3) Central tunnel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos