Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Porsche
    3. :
  3. 911
    4. : Door panel

Porsche 911 - Door panel

Porsche 911 (1997-2005 / 996)
How to remove the door panel in the Porsche 911?
In this tutorial we can see how to disassemble the door panel in the Porsche 911, an extremely simple and fast operation. First of all, we open the door in …read all…
Posted on 15 May 2024 by ScegliAuto
Porsche 911 (1982-1991 / )
How to replace the door leaf on a Porsche 911
Porsche door panel to change? Let's see how to do the disassembly. With a screwdriver we unscrew the screws placed in the space of the handle lever (after …read all…
Posted on 30 November 2023 by ScegliAuto
Porsche 911 (2005-2011 / 997)
Replacement of the door panel on Porsche 911 Carrera
Let's see how to remove the left front door panel of a Porsche 911 Carrera. We disconnect the battery terminals in the engine compartment, with a screwdriver …read all…
Posted on 28 November 2023 by ScegliAuto
Porsche 911 (1997-2005 / 996)
Door panel removal instructions
To be able to remove the door panel, start by removing the triangular-shaped plastic covering located in correspondence with the external rear-view mirror and …read all…
Posted on 25 August 2023 by ScegliAuto
Porsche 911 (1997-2005 / 996)
Removing the front door panel
Using a small fixed screwdriver as a lever, remove the chrome plate on the side airbag container; in the same way, unhook the courtesy light and the lining of …read all…
Posted on 1 July 2023 by ScegliAuto
Battery (3) Coil (1) Arm (2) Gearbox (1) Spark plugs (3) Soft top (2) Bodywork (2) Key (5) V-belt (1) Checks and maintenance (5) Dashboard (1) Bearing (1) Brake discs (6) Headlight (6) Tail light (1) Air filter (1) Cabin air filter (3) Oil filter (1) Accessory Kit (3) Headlight bulb (1) Interior lights ceiling light bulb (1) Antifreeze liquid (2) Muffler (1) Engine (3) Starter motor (2) Gear oil (1) Engine oil (8) Door panel (5) Front bumper (5) Rear bumper (3) Brake pads (1) Hydraulic pistons (1) Gear Shift Knob (1) Pump (3) Fuel pump (2) Instrument cluster (3) Radiator (2) Wheel (3) Fuse box (3) Seat (1) Outside rearview mirror (2) Windscreen wipers (3) Central tunnel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos