Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Door Panel on Porsche 911

Model: Porsche 911 - Years: 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991
Part: Door trim panel

See other generations:
Video tutorial

Need to change the door panel on a Porsche? Let's see how to disassemble it. Use a screwdriver to remove the screws located in the handle lever area (after removing the plastic cover). Remove the trim near the lock, unscrew the remaining screws on the door panel, and detach the retaining clips.

Finally, pull the panel off by hand and disconnect it from the door (unplug the power wiring and the opening cable). Perform the desired maintenance inside the door.

Install the new panel or repair the old one.


Updated on 15 March 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery of a Porsche 911
How to Replace the Key Battery of a Porsche 911
Porsche 911 (1997-2005 / 996) Start by inserting the tip of a small flathead screwdriver into the key of your Porsche 911 and prying it open. This will expose the dead battery. Pr…
Removing Water Pump from Porsche 911
Removing Water Pump from Porsche 911
Porsche 911 (1997-2005 / 996) In this video tutorial, you will learn how to remove the water pump from a Porsche 911 Carrera. First, open the rear hood and remove the timing belt:…
Disassembly and Replacement of the Front Headlights on the Porsche 911
Disassembly and Replacement of the Front Headlights on the Porsche 911
Porsche 911 (2019-2026 / 992) The instructions in this guide will allow you to disassemble and replace the front headlights on the Porsche 911. First, open the hood of the vehicle…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos