Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Porsche 911?

Model: Porsche 911 996 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Door trim panel

See other generations:
Video tutorial

In this tutorial, you will see how to remove the door panel on a Porsche 911, a very simple and quick operation. First, open the door you will be working on. Then, using a plastic trim tool to avoid leaving marks, carefully pry off the inner cover of the mirror, the handle cover, and the airbag logo.

Next, remove the various screws indicated using both a Torx wrench and a standard Phillips screwdriver. Pry along the perimeter of the panel and separate it from the door.

To install the replacement, simply follow the reverse procedure.


Updated on 30 September 2026 by ScegliAuto


Related tutorials

How to Remove the Starter Motor on a Porsche 911
How to Remove the Starter Motor on a Porsche 911
Porsche 911 (1997-2005 / 996) Let's see how to remove the starter motor on a Porsche 911. First, use a socket wrench to disconnect the battery power cables. Lift the car on a colu…
How to Replace Door Panel on Porsche 911
How to Replace Door Panel on Porsche 911
Porsche 911 (1982-1991 / ) Need to change the door panel on a Porsche? Let's see how to disassemble it. Use a screwdriver to remove the screws located in the handle lever area …
How to Remove the Center Console on a Porsche 911 (991)
How to Remove the Center Console on a Porsche 911 (991)
Porsche 911 (2011-2019 / 991) In this video, you will see the main steps to remove the center console and its controls on a Porsche 911 (991). First, get inside the vehicle and li…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos