Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Porsche
    3. :
  3. 911
    4. : Brake discs

Porsche 911 - Brake discs

Porsche 911 (2005-2011 / 997)
How to replace the front brake disc on a Porsche 911
How to replace the front brake disc on a Porsche 911? Let's see the disassembly of the pieces. We place our car on a column bridge; we lift to a comfortable …read all…
Posted on 21 November 2023 by ScegliAuto
Porsche 911 (1997-2005 / 996)
Car brake discs replacement
The following guide gives you useful information on how to replace the brake discs. Both the braking system and the vehicle discs are of primary importance to …read all…
Posted on 16 September 2023 by ScegliAuto
Porsche 911 (1997-2005 / 996)
Replacement discs and rear pads
To carry out this maintenance, lift the car on the bridge and remove the rear wheel; extract the safety split pin from the fixing pin of the spring applied …read all…
Posted on 9 September 2023 by ScegliAuto
Porsche 911 (1997-2005 / 996)
Removal and replacement of brake discs
This video shows us how to remove and replace the brake discs of our car. First we lift the car with the help of a bridge and remove the rims to access our …read all…
Posted on 31 July 2023 by ScegliAuto
Porsche 911 (1997-2005 / 996)
Replacement of front brake discs and pads
Damaged brake discs can compromise braking so it is better to replace them. Remove the brake caliper using a ratchet wrench by unscrewing the two rear screws. …read all…
Posted on 4 July 2023 by ScegliAuto
Porsche 911 (1997-2005 / 996)
Replacement brake discs and pads
Raise the car and remove the wheel. With a special tool and hammer, clean the head of the disc sealing screws, then remove them once they have been disengaged. …read all…
Posted on 30 June 2023 by ScegliAuto
Battery (3) Coil (1) Arm (2) Gearbox (1) Spark plugs (3) Soft top (2) Bodywork (2) Key (5) V-belt (1) Checks and maintenance (5) Dashboard (1) Bearing (1) Brake discs (6) Headlight (6) Tail light (1) Air filter (1) Cabin air filter (3) Oil filter (1) Accessory Kit (3) Headlight bulb (1) Interior lights ceiling light bulb (1) Antifreeze liquid (2) Muffler (1) Engine (3) Starter motor (2) Gear oil (1) Engine oil (8) Door panel (5) Front bumper (5) Rear bumper (3) Brake pads (1) Hydraulic pistons (1) Gear Shift Knob (1) Pump (3) Fuel pump (2) Instrument cluster (3) Radiator (2) Wheel (3) Fuse box (3) Seat (1) Outside rearview mirror (2) Windscreen wipers (3) Central tunnel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos