Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Porsche
    3. :
  3. 911
    4. : Battery

Porsche 911 - Battery

Porsche 911 (2011-2019 / 991)
Porsche 911 remote control battery replacement
We see in this guide the step-by-step instructions to disassemble and replace the battery of the Porsche 911 key remote control. First of all we take our …read all…
Posted on 16 October 2022 by ScegliAuto
Porsche 911 (2011-2019 / 991)
How to replace the battery of the Porsche 911 Carrera 4s
The guide shows how to remove the battery of the Porsche 911 Carrera 4s. Before replacing the battery, a power converter must be connected to the OBD socket in …read all…
Posted on 10 May 2024 by ScegliAuto
Porsche 911 (2005-2011 / 997)
How to open the hood of a Porsche without a battery.
To open the hood of a Porsche it is necessary to act on the control on the key. In this guide we will see how to open the hood when the battery is low. First …read all…
Posted on 20 March 2024 by ScegliAuto
Battery (3) Coil (1) Arm (2) Gearbox (1) Spark plugs (3) Soft top (2) Bodywork (2) Key (5) V-belt (1) Checks and maintenance (5) Dashboard (1) Bearing (1) Brake discs (6) Headlight (6) Tail light (1) Air filter (1) Cabin air filter (3) Oil filter (1) Accessory Kit (3) Headlight bulb (1) Interior lights ceiling light bulb (1) Antifreeze liquid (2) Muffler (1) Engine (3) Starter motor (2) Gear oil (1) Engine oil (8) Door panel (5) Front bumper (5) Rear bumper (3) Brake pads (1) Hydraulic pistons (1) Gear Shift Knob (1) Pump (3) Fuel pump (2) Instrument cluster (3) Radiator (2) Wheel (3) Fuse box (3) Seat (1) Outside rearview mirror (2) Windscreen wipers (3) Central tunnel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos