Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Porsche
    3. :
  3. 911
    4. : Headlight

Porsche 911 - Headlight

Porsche 911 (2005-2011 / 997)
How do you replace the headlight on the Porsche 911?
In order to replace the front headlight of the Porsche 911 you have to lift the front hood and take the supplied key which is located under the carpet. …read all…
Posted on 9 May 2024 by ScegliAuto
Porsche 911 (1982-1991 / )
Removal of the headlight Porsche 911 Carrera 1987
In this video we will see the main instructions on how to remove the headlight of a Porsche 911 Carrera from 1982, first series. To disassemble it we go to …read all…
Posted on 12 February 2024 by ScegliAuto
Porsche 911 (2005-2011 / 997)
Headlight removal on Porsche 911
We remove the headlight on Porsche 911. We open the front hood by pulling the lever located in the passenger compartment, we secure the same. Remove the cover …read all…
Posted on 5 December 2023 by ScegliAuto
Porsche 911 (2011-2019 / 991)
How to remove the headlight on Porsche 991
Let's see how to remove the headlight on Porsche 991. Compared to many cars, the headlight removal system is very simple and quick. To begin, we raise the …read all…
Posted on 20 October 2023 by ScegliAuto
Porsche 911 (2005-2011 / 997)
How to remove the headlight of the Porsche 911
The disassembly of the headlight is extremely simple since it has a spring fixing system that holds it in place; therefore open the front hood and remove the …read all…
Posted on 7 September 2023 by ScegliAuto
Porsche 911 (1991-1997 / )
Installation of xenon bulbs
In order to install a kit of xenon bulbs to the front headlights, the headlights must first be disassembled: start by disconnecting the battery, then release …read all…
Posted on 22 August 2023 by ScegliAuto
Battery (3) Coil (1) Arm (2) Gearbox (1) Spark plugs (3) Soft top (2) Bodywork (2) Key (5) V-belt (1) Checks and maintenance (5) Dashboard (1) Bearing (1) Brake discs (6) Headlight (6) Tail light (1) Air filter (1) Cabin air filter (3) Oil filter (1) Accessory Kit (3) Headlight bulb (1) Interior lights ceiling light bulb (1) Antifreeze liquid (2) Muffler (1) Engine (3) Starter motor (2) Gear oil (1) Engine oil (8) Door panel (5) Front bumper (5) Rear bumper (3) Brake pads (1) Hydraulic pistons (1) Gear Shift Knob (1) Pump (3) Fuel pump (2) Instrument cluster (3) Radiator (2) Wheel (3) Fuse box (3) Seat (1) Outside rearview mirror (2) Windscreen wipers (3) Central tunnel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos