Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing Xenon Headlight Bulbs

Model: Porsche 911 - Years 1991-1997
Part: Headlight

To install a xenon bulb kit in the front headlights, first remove the headlights: start by disconnecting the battery, then release the headlight mounting lever and pull the headlight out of its housing; remove the protective cap from the bulb holder, disconnect the power connectors from the original bulb, release the retaining spring, and pull out the original bulb; insert the new xenon bulb, secure it with the retaining spring, position the ignition module inside the cover, and connect the respective plugs before securing the cover and the headlight back in place. To enhance the appearance, it is advisable to also replace the position light bulbs with LED type.

Updated on 16 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the front headlight of the Porsche 911.
Disassembly of the front headlight of the Porsche 911.
Porsche 911 (1997-2005 / 996) Today's steps will show us the process of disassembling and replacing the front headlight and its bulbs of the Porsche 911. First, we open the front …
Removing Rear Light on Porsche 911
Removing Rear Light on Porsche 911
Porsche 911 (2005-2011 / 997) Remove the damaged rear light on a Porsche 911. Open the rear hood and locate the light to be removed. Use a screwdriver to unscrew the retaining scr…
Replacement of the Coolant Reservoir
Replacement of the Coolant Reservoir
Porsche 911 (1997-2005 / 996) Open the rear hood and ensure it is securely supported: the coolant reservoir is located on the left side. It is recommended to perform this operatio…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos