Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Porsche 911 Carrera 4S

Model: Porsche 911 991 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Battery

See other generations:
Video tutorial

This guide shows how to remove the battery from a Porsche 911 Carrera 4S. Before replacing the battery, connect a power converter to the OBD port located in the fuse box inside the cabin. From the front compartment, remove the portable compressor and its housing using a T30 Torx screwdriver.

Use a 13mm wrench to remove the three bolts securing the battery hold-down and the battery itself. Disconnect the positive terminal and cover it with insulating material, then set it aside.

Disconnect the negative terminal and replace the battery with a new one. After reconnecting the battery terminals, perform a vehicle diagnostic to reset any errors.


Updated on 20 May 2026 by ScegliAuto


Related tutorials

Replacing the Fuel Pump on a Porsche 911 Carrera
Replacing the Fuel Pump on a Porsche 911 Carrera
Porsche 911 (1997-2005 / 996) Today, let's go through this brief and simple guide to remove and replace the fuel pump on a Porsche 911 Carrera. First, open the hood and start by r…
Replacing the Fuel Pump on the Porsche 911 Carrera
Replacing the Fuel Pump on the Porsche 911 Carrera
Porsche 911 (1997-2005 / 996) Today, we will see in this video tutorial how to remove and replace the fuel pump on the Porsche 911 Carrera by following the instructions below. Fir…
How to Replace the Key Battery of a Porsche 911
How to Replace the Key Battery of a Porsche 911
Porsche 911 (1997-2005 / 996) Start by inserting the tip of a small flathead screwdriver into the key of your Porsche 911 and prying it open. This will expose the dead battery. Pr…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos