Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fuel Pump on the Porsche 911 Carrera

Model: Porsche 911 996 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Fuel pump

See other generations:
Video tutorial

Today, we will see in this video tutorial how to remove and replace the fuel pump on the Porsche 911 Carrera by following the instructions below. First, open the hood and start disconnecting both battery terminals to remove the battery; then remove the battery tray by unscrewing the bolts.

At this point, use a socket wrench to remove the screws from the fuel pump cover; then disconnect the electrical connector and remove the two fuel lines by unscrewing the pump collar to replace it with the new one!


Updated on 22 June 2026 by ScegliAuto


Related tutorials

Replacing the Fuel Pump on a Porsche 911 Carrera
Replacing the Fuel Pump on a Porsche 911 Carrera
Porsche 911 (1997-2005 / 996) Today, let's go through this brief and simple guide to remove and replace the fuel pump on a Porsche 911 Carrera. First, open the hood and start by r…
Removing Water Pump from Porsche 911
Removing Water Pump from Porsche 911
Porsche 911 (1997-2005 / 996) In this video tutorial, you will learn how to remove the water pump from a Porsche 911 Carrera. First, open the rear hood and remove the timing belt:…
Replacing the Door Panel on a Porsche 911 Carrera
Replacing the Door Panel on a Porsche 911 Carrera
Porsche 911 (2005-2011 / 997) Let's see how to remove the left front door panel of a Porsche 911 Carrera. Disconnect the battery terminals located in the engine compartment. Using…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos