Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fuel Pump on the Porsche Cayenne

Model: Porsche Cayenne MK 1 - Years 2003-2010
Part: Fuel pump

This guide will show you how to remove and replace the fuel pump on the Porsche Cayenne. First, open the rear doors of the vehicle and start by removing the rear seat by pulling it upward to detach it. Next, remove the fuel pump cover and disconnect the various fuel lines and the electrical connector for the fuel level sensor, as shown in the video. At this point, unscrew the pump ring to remove it, replacing it with the new original one. Reconnect everything and reassemble the rear seat.

Posted on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the fuel pump of the Porsche Cayenne?
How do you replace the fuel pump of the Porsche Cayenne?
Porsche Cayenne (2003-2010 / MK 1) In order to replace the fuel pump of the Porsche Cayenne, you need to loosen the screws that secure the rear seat bench to its housing: once this com…
Where are the fuses located in the Porsche Cayenne?
Where are the fuses located in the Porsche Cayenne?
Porsche Cayenne (2010-2017 / MK 2) Inside the Porsche Cayenne, all the fuses are contained within their respective fuse boxes that are installed on the car: in this type of vehicle, it…
Where are the fuses located in the Porsche Cayenne?
Where are the fuses located in the Porsche Cayenne?
Porsche Cayenne (2003-2010 / MK 1) The fuses in the Porsche Cayenne are located inside dedicated fuse boxes installed in the vehicle: in this type of car, you can find three boxes for …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos