Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Water Pump on Porsche Cayman

Model: Porsche Cayman 987 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Pump

See other generations:
Video tutorial

The water pump you need (with o-ring) is "9A110604802". Lift the engine bonnet of the vehicle and remove the engine cover. Then, get underneath the vehicle (raised with a jack and axle stands) and also remove the undertray by unscrewing the T25 Torx screws.

Loosen the bolt that tensions the alternator belt, then disconnect the coolant hose and drain the fluid. At this point, you can also replace the thermostat for that fluid; otherwise, unscrew the mounting elements of the pump and replace it. Proceed in reverse order for reassembly as shown in the video.


Updated on 17 April 2026 by ScegliAuto


Related tutorials

Replacing Engine Oil and Oil Filter on Porsche Cayman (987) 2.7L
Replacing Engine Oil and Oil Filter on Porsche Cayman (987) 2.7L
Porsche Cayman (2006-2012 / 987) In today's video, you will see how to perform routine maintenance by replacing the engine oil and oil filter on a Porsche Cayman 987 with a 2.7L engi…
How to Replace the Key Battery on a Porsche Cayman
How to Replace the Key Battery on a Porsche Cayman
Porsche Cayman (2006-2012 / 987) In this new mini guide, learn how to correctly replace the key battery on your Porsche Cayman. Once you have purchased a new CR2032 3V battery, take …
Replacing the Headlight Bulbs on a Porsche Cayman
Replacing the Headlight Bulbs on a Porsche Cayman
Porsche Cayman (2006-2012 / 987) In this video, see how to replace the front headlight bulbs on a Porsche Cayman. The disassembly of the front headlight is very simple and quick. Fir…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos