Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Porsche
    3. : 928

How to Reupholster the Seats in Faux Leather of the Porsche 928

Model: Porsche 928 MK 1 - Years: 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988
Part: Seat

Video tutorial

Repairing the faux leather seat of the Porsche 928 is a straightforward task that you can carry out independently. This video tutorial will guide you through the steps to fix the seats.

Start by mixing the two-component silicone rubber with component B; weigh it and divide it into equal parts, then mix until the mixture is homogeneous. Take the mould of the seat cover and proceed as shown in the video.

Apply the rubber to the seat leather and allow it to dry for 10 minutes. Next, apply the filler to the tear and heat it to 300°C, then take the rubber and shape it. Continue working over the tear until you have finished.


Updated on 1 September 2026 by ScegliAuto


Related tutorials

How to reset the TPMS light on a Porsche
How to reset the TPMS light on a Porsche
Porsche Porsche Various The steps to reset the TPMS light, related to tire pressure on Porsche vehicles, are simple and quick to perform independently. The first step is to …
How to Adjust Daylight Saving Time on a Porsche
How to Adjust Daylight Saving Time on a Porsche
Porsche Porsche Various To adjust the daylight saving time on a Porsche: turn on the ignition, then use the multifunction button on the steering wheel to display the "vehicl…
Replacing the Spark Plugs and Leads of the Porsche 993
Replacing the Spark Plugs and Leads of the Porsche 993
Porsche Porsche Various This guide provides the main instructions for removing and replacing the spark plugs along with the wiring of the Porsche 993. In this case, the spar…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos