Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the fuel pump of the Porsche Cayenne?

Model: Porsche Cayenne MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Fuel pump

See other generations:
Video tutorial

In order to replace the fuel pump of the Porsche Cayenne, you need to loosen the screws that secure the rear seat bench to its housing: once this component has been freed from its seat, you can proceed by removing the circular protective panel on top of the pump.

After this panel has been removed, you can loosen the screws that secure the pump to its seat, so that it can be removed from inside the tank and replaced with a new one. After the replacement, you can secure everything back in place.


Posted on 20 December 2024 by ScegliAuto


Related tutorials

Replacing the Fuel Pump on the Porsche Cayenne
Replacing the Fuel Pump on the Porsche Cayenne
Porsche Cayenne (2003-2010 / MK 1) This guide will show you how to remove and replace the fuel pump on the Porsche Cayenne. First, open the rear doors of the vehicle and start by remov…
Where are the fuses located in the Porsche Cayenne?
Where are the fuses located in the Porsche Cayenne?
Porsche Cayenne (2003-2010 / MK 1) The fuses in the Porsche Cayenne are located inside dedicated fuse boxes installed in the vehicle: in this type of car, you can find three boxes for …
Where are the fuses located in the Porsche Cayenne?
Where are the fuses located in the Porsche Cayenne?
Porsche Cayenne (2010-2017 / MK 2) Inside the Porsche Cayenne, all fuses are contained within their respective fuse boxes installed in the vehicle: in this type of vehicle, you can fin…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos