Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Porsche
    3. :
  3. 911
    4. : Fuel pump

Porsche 911 - Fuel pump

Fuel Pump Porsche 911 (1997-2005 / 996)

Porsche 911 (1997-2005 / 996)
Replacing the Fuel Pump on a Porsche 911 Carrera
Today, let's go through this brief and simple guide to remove and replace the fuel pump on a Porsche 911 Carrera. First, open the hood and start by removing …Read all…
Posted on 2 September 2026 by ScegliAuto
Porsche 911 (1997-2005 / 996)
Replacing the Fuel Pump on the Porsche 911 Carrera
Today, we will see in this video tutorial how to remove and replace the fuel pump on the Porsche 911 Carrera by following the instructions below. First, open …Read all…
Posted on 2 September 2026 by ScegliAuto
Car stereo (1) Battery (1) Ignition coil (1) Control arm (2) Transmission (1) Spark plugs (4) Convertible top (2) Body (6) Key (11) V-belt (1) Checks and maintenance (4) Dashboard (1) Bearing (1) Brake rotors (6) Headlight (8) Tail light (1) Air filter (1) Cabin air filter (3) Oil filter (1) Accessory kit (3) Headlight bulb (1) Interior dome light bulb (1) Antifreeze coolant (2) Exhaust muffler (1) Engine (3) Starter motor (2) Transmission fluid (1) Engine oil (9) Clock (1) Door trim panel (6) Front bumper (5) Rear bumper (3) Brake pads (1) Hydraulic pistons (1) Shift knob (1) Pump (3) Fuel pump (2) Car door (1) Instrument cluster (3) Radiator (2) Wheel (3) Fuse box (5) Seat (1) Side mirror (2) (3) Tire pressure warning light (1) Service warning light (1) Windshield wipers (3) Center console tunnel (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos