Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Porsche
    3. :
  3. 911
    4. : Outside rearview mirror

Porsche 911 - Outside rearview mirror

Porsche 911 (2011-2019 / 991)
How do you replace the mirror cap of the Porsche 911 rearview mirror?
In order to replace the mirror cap of the Porsche 911 rearview mirror, you need to pry with an object such as a screwdriver on the back of the mirror glass: …read all…
Posted on 27 February 2024 by ScegliAuto
Porsche 911 (2005-2011 / 997)
How do you replace the exterior mirror on the Porsche 911?
In order to replace the exterior rear-view mirror of the Porsche 911 you need to pry the lower part of the glass, so that it can be removed from the inside of …read all…
Posted on 29 August 2022 by ScegliAuto
Battery (3) Coil (1) Arm (2) Gearbox (1) Spark plugs (3) Soft top (2) Bodywork (2) Key (5) V-belt (1) Checks and maintenance (5) Dashboard (1) Bearing (1) Brake discs (6) Headlight (6) Tail light (1) Air filter (1) Cabin air filter (3) Oil filter (1) Accessory Kit (3) Headlight bulb (1) Interior lights ceiling light bulb (1) Antifreeze liquid (2) Muffler (1) Engine (3) Starter motor (2) Gear oil (1) Engine oil (8) Door panel (5) Front bumper (5) Rear bumper (3) Brake pads (1) Hydraulic pistons (1) Gear Shift Knob (1) Pump (3) Fuel pump (2) Instrument cluster (3) Radiator (2) Wheel (3) Fuse box (3) Seat (1) Outside rearview mirror (2) Windscreen wipers (3) Central tunnel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos