Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Outside Rearview Mirror on a Porsche 911?

Model: Porsche 911 997 - Years 2005-2011
Part: Side mirror

To replace the outside rearview mirror on a Porsche 911, pry at the bottom of the glass so that it can be removed from its housing: once the glass is detached, disconnect the underlying connector and also loosen the screws located in this position. By doing this, you will be able to detach the mirror cap from its support: once it is removed, position the new one, securing it with the appropriate screws and then installing the glass.

Updated on 11 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Mirror Cap on a Porsche 911?
How to Replace the Mirror Cap on a Porsche 911?
Porsche 911 (2011-2019 / 991) To replace the mirror cap on a Porsche 911, use a flat object like a screwdriver to pry at the back of the mirror glass. This will allow you to fully…
How to Replace the Key Battery of a Porsche 911
How to Replace the Key Battery of a Porsche 911
Porsche 911 (1997-2005 / 996) Start by inserting the tip of a small flathead screwdriver into the key of your Porsche 911 and prying it open. This will expose the dead battery. Pr…
Disassembly and Replacement of the Front Headlights on the Porsche 911
Disassembly and Replacement of the Front Headlights on the Porsche 911
Porsche 911 (2019-2026 / 992) The instructions in this guide will allow you to disassemble and replace the front headlights on the Porsche 911. First, open the hood of the vehicle…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos