Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Porsche
    3. :
  3. 911
    4. : Windscreen wipers

Porsche 911 - Windscreen wipers

Porsche 911 (2005-2011 / 997)
How do you replace the windshield washer reservoir on the Porsche 911?
To be able to replace the windshield washer fluid reservoir on the Porsche 911, you have to jack the car up so that the left front wheel is not in contact with …read all…
Posted on 12 May 2024 by ScegliAuto
Porsche 911 (1982-1991 / )
Removing the wiper motor on Porsche 911
Removing the Porsche 911 wiper motor? We disassemble the rear motor. We unscrew the arm of the wiper blade with a socket wrench. Once the brush has been …read all…
Posted on 14 December 2023 by ScegliAuto
Porsche 911 (1997-2005 / 996)
Removing and replacing wipers
This video shows us how to remove and replace the wipers on our car. If with the passage of time or with exposure to various weather conditions our wipers no …read all…
Posted on 3 August 2023 by ScegliAuto
Battery (3) Coil (1) Arm (2) Gearbox (1) Spark plugs (3) Soft top (2) Bodywork (2) Key (5) V-belt (1) Checks and maintenance (5) Dashboard (1) Bearing (1) Brake discs (6) Headlight (6) Tail light (1) Air filter (1) Cabin air filter (3) Oil filter (1) Accessory Kit (3) Headlight bulb (1) Interior lights ceiling light bulb (1) Antifreeze liquid (2) Muffler (1) Engine (3) Starter motor (2) Gear oil (1) Engine oil (8) Door panel (5) Front bumper (5) Rear bumper (3) Brake pads (1) Hydraulic pistons (1) Gear Shift Knob (1) Pump (3) Fuel pump (2) Instrument cluster (3) Radiator (2) Wheel (3) Fuse box (3) Seat (1) Outside rearview mirror (2) Windscreen wipers (3) Central tunnel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos