Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Porsche
    3. :
  3. 911
    4. : Removing the wiper motor on Porsche 911

Porsche 911 - Video tutorial

Model: Porsche 911 - Years 1982-1991
Part: Windscreen wipers
Operation: Removing the wiper motor on Porsche 911

Removing the Porsche 911 wiper motor? We disassemble the rear motor. We unscrew the arm of the wiper blade with a socket wrench. Once the brush has been removed from above the rear window, we remove the rear seat of the Porsche and then the cover panel. Always with the socket wrench we unscrew the locking pins of the wiper motor. We replace the piece we disassembled with a new original one. We fasten the piece and all the mounting screws, We cover the panel and mount the seat. Finally we assemble the arm with the brush. We operate and test the operation.


Posted on 14 December 2023 by ScegliAuto



How to remove the starter motor on Porsche 911
Porsche 911 (1997-2005 / 996) Let's see how to remove the starter motor on a Porsche 911. To begin with, we disconnect the cables from the car battery power supply with a socket w
How do you remove the convertible top of the Porsche 911?
Porsche 911 (1997-2005 / 996) In order to replace the hood of the Porsche 911, it must be lifted so that you can access its internal part: in this way it will be possible to go an
How to replace the arms of the convertible top of the Porsche 911
Porsche 911 (1997-2005 / 996) Today we will see the main steps that will allow us to disassemble and replace the arms of the Porsche 911 hood, following the instructions below. Fi

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos