Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windshield Washer Fluid Reservoir on a Porsche 911

Model: Porsche 911 997 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Windshield wipers

See other generations:
Video tutorial

To replace the windshield washer fluid reservoir on a Porsche 911, lift the car with a jack so that the front left wheel is not in contact with the ground. Once lifted, you can unscrew the bolts securing the wheel and remove it from the corresponding hub. After removing the wheel, unscrew the screws holding the inner wheel arch cover, which must be removed to access the components inside; here, you will locate the windshield washer fluid reservoir, which must be freed from its position by unscrewing the bolts and disconnecting all connectors, so it can be replaced with a new one.


Updated on 21 May 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Windshield Washer Fluid Reservoir on the Porsche 911
Guide to Replacing the Windshield Washer Fluid Reservoir on the Porsche 911
Porsche 911 (1997-2005 / 996) In this brief guide, discover the steps to remove and replace the windshield washer fluid reservoir on the Porsche 911. First, lift the vehicle and b…
How to Replace the Coolant in a Porsche 911
How to Replace the Coolant in a Porsche 911
Porsche 911 (2005-2011 / 997) Today, follow these instructions to replace the engine coolant in your Porsche 911. First, lift the vehicle and start loosening the 6 mm hex screw on…
How to Replace the Radiator Fluid on a Porsche 911
How to Replace the Radiator Fluid on a Porsche 911
Porsche 911 (2011-2019 / 991) Let's see how to top off the radiator fluid (specific cap) on a Porsche 911. First, pull the plastic lever located at the bottom left of the dashboar…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos