Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Porsche
    3. :
  3. 911
    4. : How to replace the coolant of the Porsche 911.

Porsche 911 - Video tutorial

Model: Porsche 911 997 - Years 2005-2011
Part: Antifreeze liquid
Operation: How to replace the coolant of the Porsche 911.

Today we will see the instructions that will allow us to replace the engine coolant of the Porsche 911. First, lift the car and begin to unscrew the coolant drain screw with a 6mm hex key, allowing the fluid to drain into a container for about ten minutes. Then, screw the drain screw back in, as shown in the video. At this point, unscrew the cap of the coolant reservoir, pour in the new coolant and fill it up to the maximum level mark, topping up if necessary.


Posted on 10 September 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos