Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Front Seat

Model: Porsche 911 - Years 1991-1997
Part: Seat

The driver's side front seat has an electric adjustment system. To remove it, follow these steps: 1) Move the depth adjustment all the way forward to access the rear mounting pins of the tracks and unscrew them (there are four in total). 2) Move the depth adjustment all the way back to access the front mounting pins of the tracks and remove them. 3) Access the trunk to disconnect the battery before unplugging the connectors under the seat. Make sure you have the activation code for the radio. 4) Once the battery is disconnected, lift the seat cushion and disconnect the connectors underneath to complete the removal.

Updated on 16 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassembly and Replacement of the Front Headlights on the Porsche 911
Disassembly and Replacement of the Front Headlights on the Porsche 911
Porsche 911 (2019-2026 / 992) The instructions in this guide will allow you to disassemble and replace the front headlights on the Porsche 911. First, open the hood of the vehicle…
Removing the Wiper Motor on Porsche 911
Removing the Wiper Motor on Porsche 911
Porsche 911 (1982-1991 / ) Removing the wiper motor from the Porsche 911? Start by removing the rear wiper motor. Use a socket wrench to remove the wiper arm from the rear wind…
Disassembly of the front headlight of the Porsche 911.
Disassembly of the front headlight of the Porsche 911.
Porsche 911 (1997-2005 / 996) Today's steps will show us the process of disassembling and replacing the front headlight and its bulbs of the Porsche 911. First, we open the front …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos