Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Porsche
    3. :
  3. 911
    4. : Spark plugs

Porsche 911 - Spark plugs

Porsche 911 (1997-2005 / 996)
How to remove the spark plugs on the Porsche 911
In today's video we will see the main steps that will allow us to disassemble and replace the engine spark plugs on a Porsche 991 (996). First of all we go to …read all…
Posted on 13 February 2024 by ScegliAuto
Porsche 911 (1997-2005 / 996)
How to remove and replace spark plugs on a Porsche 911
How to remove and replace spark plugs on a Porsche 911? Let's see how to intervene: lift the car with a jack, put it in safety, remove the rear wheel (as in …read all…
Posted on 1 November 2023 by ScegliAuto
Porsche 911 (1997-2005 / 996)
Replacement spark plugs and spark plug cables
It is advisable to carry out this maintenance with a cold engine. In order to access the spark plugs it is first of all necessary to lift the car and remove …read all…
Posted on 30 June 2023 by ScegliAuto
Battery (3) Coil (1) Arm (2) Gearbox (1) Spark plugs (3) Soft top (2) Bodywork (2) Key (5) V-belt (1) Checks and maintenance (5) Dashboard (1) Bearing (1) Brake discs (6) Headlight (6) Tail light (1) Air filter (1) Cabin air filter (3) Oil filter (1) Accessory Kit (3) Headlight bulb (1) Interior lights ceiling light bulb (1) Antifreeze liquid (2) Muffler (1) Engine (3) Starter motor (2) Gear oil (1) Engine oil (8) Door panel (5) Front bumper (5) Rear bumper (3) Brake pads (1) Hydraulic pistons (1) Gear Shift Knob (1) Pump (3) Fuel pump (2) Instrument cluster (3) Radiator (2) Wheel (3) Fuse box (3) Seat (1) Outside rearview mirror (2) Windscreen wipers (3) Central tunnel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos