Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove Spark Plugs on a Porsche 911

Model: Porsche 911 996 - Years 1997-2005
Part: Spark plugs

In today's video, you will see the main steps to remove and replace the engine spark plugs on a Porsche 991 (996). First, lift the vehicle, keeping in mind that the engine is located at the rear; then locate the spark plugs by unscrewing the mounting screws of the coils. Once the coils are removed, use a socket wrench with an extension to unscrew and remove the spark plugs, as shown in the video; now you can replace them with new ones, screwing them in by hand first and then tightening with a torque wrench to 7 lb-ft!

Updated on 17 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove and Replace Spark Plugs on a Porsche 911
How to Remove and Replace Spark Plugs on a Porsche 911
Porsche 911 (1997-2005 / 996) How do you remove and replace the spark plugs on a Porsche 911? Here's how to proceed: Lift the car with a jack and secure it. Remove the rear wheel …
How do you replace the spark plugs of the Porsche 911?
How do you replace the spark plugs of the Porsche 911?
Porsche 911 (2011-2019 / 991) In order to replace the spark plugs of the Porsche 911, you need to lift the car with a jack or a lift so that it is possible to loosen the screws th…
How to Remove the Starter Motor on a Porsche 911
How to Remove the Starter Motor on a Porsche 911
Porsche 911 (1997-2005 / 996) Let's see how to remove the starter motor on a Porsche 911. First, use a socket wrench to disconnect the battery power cables. Lift the car on a colu…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos