Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Porsche
    3. :
  3. 911
    4. : Replacement spark plugs and spark plug cables

Porsche 911 - Video tutorial

Model: Porsche 911 996 - Years 1997-2005
Part: Spark plugs
Operation: Replacement spark plugs and spark plug cables

It is advisable to carry out this maintenance with a cold engine. In order to access the spark plugs it is first of all necessary to lift the car and remove the rear wheel. At this point, accessing the wheel arch, remove the fixing pins (10 mm wrench) of the aluminum casing placed to protect the coils and spark plug cables. Then unscrew the pins (hexagonal head) securing the coils, two for each coil, and extract the pipettes from the spark plugs; then unscrew the spark plugs and replace them with new ones without exceeding the tightening torque. Reattach the pipettes and tighten their retaining pins.


Posted on 30 June 2023 by ScegliAuto



How to remove and replace spark plugs on a Porsche 911
Porsche 911 (1997-2005 / 996) How to remove and replace spark plugs on a Porsche 911? Let's see how to intervene: lift the car with a jack, put it in safety, remove the rear wheel
How to remove the spark plugs on the Porsche 911
Porsche 911 (1997-2005 / 996) In today's video we will see the main steps that will allow us to disassemble and replace the engine spark plugs on a Porsche 991 (996). First of all
Ignition system coil replacement
Porsche 911 (1997-2005 / 996) Obtain the correct replacement spool. To access the replacement of the coil it is necessary to remove the metal protection by unscrewing the relative

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos