Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Brake Rotors

Model: Porsche 911 996 - Years 1997-2005
Part: Brake rotors

The following guide provides useful instructions on how to replace brake rotors. Both the braking system and the rotors of the vehicle are crucial for ensuring that the vehicle operates efficiently, benefiting the safety of both the driver and passengers. This procedure can be done independently without needing to visit a mechanic. First, turn the steering wheel to your side so that the brake caliper is facing you. Lift the car with a jack and remove the wheel after taking off the wheel bolts. Use a hex wrench to unscrew all the bolts on the back that secure the caliper to the frame. Then, you can slide off the brake caliper. At this point, only the caliper bracket with the brake pads inside will remain. Remove the pads using a suitable flathead screwdriver, being careful not to damage the rotor. Next, unscrew the bolts that securely hold the bracket to the hub. Set them aside, as they will be useful for reassembly. At this point, only the brake rotor will remain, which needs to be replaced.

Updated on 22 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removal and Replacement of Brake Discs
Removal and Replacement of Brake Discs
Porsche 911 (1997-2005 / 996) This video shows us how to remove and replace the brake discs on our car. First, lift the car using a lift and remove the wheels to access the brake …
Replacing Front Brake Discs and Pads
Replacing Front Brake Discs and Pads
Porsche 911 (1997-2005 / 996) Worn brake discs can compromise braking performance, so it's advisable to replace them. Remove the brake caliper using a ratchet wrench to unscrew th…
Replacing Brake Rotors and Pads
Replacing Brake Rotors and Pads
Porsche 911 (1997-2005 / 996) Lift the vehicle and remove the wheel. Using a special tool and hammer, clean the heads of the retaining screws on the rotor, then, once freed, remov…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos