Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal and Replacement of Brake Discs

Model: Porsche 911 996 - Years 1997-2005
Part: Brake rotors

This video shows us how to remove and replace the brake discs on our car. First, lift the car using a lift and remove the wheels to access the brake discs. Remove the bracket that secures the brake pads to the calipers; use a screwdriver to pry between the brake disc and the pads to retract the caliper pistons, then remove the brake pads. Unscrew the bolts that anchor the brake caliper to the mounting bracket and remove the brake caliper. Finally, remove the three bolts securing the brake disc and take it out, replacing it with a new disc.

Updated on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Brake Discs and Pads
Replacing Front Brake Discs and Pads
Porsche 911 (1997-2005 / 996) Worn brake discs can compromise braking performance, so it's advisable to replace them. Remove the brake caliper using a ratchet wrench to unscrew th…
Replacing Brake Rotors
Replacing Brake Rotors
Porsche 911 (1997-2005 / 996) The following guide provides useful instructions on how to replace brake rotors. Both the braking system and the rotors of the vehicle are crucial fo…
Replacing Brake Rotors and Pads
Replacing Brake Rotors and Pads
Porsche 911 (1997-2005 / 996) Lift the vehicle and remove the wheel. Using a special tool and hammer, clean the heads of the retaining screws on the rotor, then, once freed, remov…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos