Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Brake Pads

Model: Porsche 911 996 - Years 1997-2005
Part: Brake pads

Lift the vehicle on the lift and remove the wheel. Disconnect the brake fluid line that feeds the piston, then remove the caliper by taking off the two bolts with a ratchet wrench. Remove the worn pads and replace them with two new ones of the same type. Before installation, clean any dirt with a brush. Reinstall the bracket, cleaning and lubricating the mounting bolts, then tighten them with a wrench. Reattach the caliper. The pad with the electrical contacts should be mounted facing inward, paying attention to the direction of travel. Realign the piston by pushing it inward and check the fit of the pads against the rotor.

Updated on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the battery of the Porsche 997 key
How to change the battery of the Porsche 997 key
Porsche 911 (2005-2011 / 997) In this article, we will explain how to replace the battery of the Porsche 997 key in case the battery runs out. To replace the battery, you will nee…
Removing and Replacing Windshield Wipers
Removing and Replacing Windshield Wipers
Porsche 911 (1997-2005 / 996) This video shows how to remove and replace the windshield wipers on your car. If over time or due to exposure to various weather conditions your wipe…
How Much Does It Cost to Replace the Intermediate Shaft Bearing on a Porsche 911
How Much Does It Cost to Replace the Intermediate Shaft Bearing on a Porsche 911
Porsche 911 (1997-2005 / 996) The intermediate shaft bearing can be found online for a price ranging from $30 to $50. If you plan to purchase the entire kit related to the shaft (…

Other guides you may be interested in

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos