Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front brake pads of the Porsche Cayenne

Model: Porsche Cayenne MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Brake pads

See other generations:
Video tutorial

Let's see the instructions on how to remove and replace the front brake pads of the Porsche Cayenne. First, lift the car and start removing the front wheel; then remove the locking pin of the brake pads, removing the pads and then the front brake pads, as shown in the video.

At this point, clean the brake caliper from any residual dirt and press inside the caliper pistons to insert the new original pads; replace the other brake pads in the same way.


Posted on 16 November 2025 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on a Porsche Cayenne
How to Replace the Front Brake Pads on a Porsche Cayenne
Porsche Cayenne (2010-2017 / MK 2) To replace the front brake pads on a Porsche Cayenne, lift the vehicle so that the corresponding wheel is off the ground. Then, loosen the bolts secu…
Brake Pad Replacement
Brake Pad Replacement
Porsche Cayenne (2003-2010 / MK 1) This video shows how to replace the worn brake pads on a Porsche Cayenne in under 10 minutes! First, lift the vehicle and secure it on a jack or lift…
How to Adjust the Front Door of the Porsche Cayenne
How to Adjust the Front Door of the Porsche Cayenne
Porsche Cayenne (2003-2010 / MK 1) Let's go through the instructions to adjust the front doors of the Porsche Cayenne. First, open the front doors and start loosening the bolts that se…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos