Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Brake Pad Replacement

Model: Porsche Cayenne MK 1 - Years 2003-2010
Part: Brake pads

This video shows how to replace the worn brake pads on a Porsche Cayenne in under 10 minutes! First, lift the vehicle and secure it on a jack or lift; remove and take off the wheel. At this point, disconnect the ABS connector, and using a hammer and a wrench as a chisel, remove the caliper and take out the worn pads; these will be replaced with new ones. Once the caliper is reinstalled as before, reconnect the ABS cable. Finally, reposition and tighten the wheel as before.

Updated on 9 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front brake pads of the Porsche Cayenne
How to replace the front brake pads of the Porsche Cayenne
Porsche Cayenne (2003-2010 / MK 1) Let's see the instructions on how to remove and replace the front brake pads of the Porsche Cayenne. First, lift the car and start removing the front…
Replace Cabin Fuses in Porsche Cayenne
Replace Cabin Fuses in Porsche Cayenne
Porsche Cayenne (2003-2010 / MK 1) Do you want to replace the damaged fuses for the cigarette lighter inside the Cayenne? Let's look at removing the fuses located inside the dashboard.…
Replacement of the rear headlight bulbs of the Porsche Cayenne
Replacement of the rear headlight bulbs of the Porsche Cayenne
Porsche Cayenne (2003-2010 / MK 1) Following these brief and simple instructions, we will see how to replace the bulbs of the rear light of the Porsche Cayenne. First, open the rear do…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos