Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the rear bumper of the Peugeot 308?

Model: Peugeot 308 T7, MK 1 - Years 2007-2014
Part: Rear bumper

To remove the rear bumper of the Peugeot 308, you need to open the rear hatch and then loosen the screws that internally fix the two rear lights: once these two headlights have been removed, it will be possible to proceed by removing the headlights from their seat and disconnecting their connectors. At this point, you can loosen the screws that fix the bumper from its lower part, from inside the wheel arches, and from inside the headlight housings. Once all the screws have been loosened, you can remove the old bumper and replace it with a new one.

Posted on 5 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the rear bumper of the Peugeot 308
How to disassemble the rear bumper of the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) In the following article, we will analyze the procedure for disassembling and replacing the rear bumper of the Peugeot 308 T9. First, you need to rem…
How to remove the rear bumper of the Peugeot 308
How to remove the rear bumper of the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) The removal of the rear bumper on Peugeot 308 vehicles may seem like a difficult task to do independently, but on T 9 models it is easier than you mi…
How to Remove the Front Bumper of the Peugeot 308?
How to Remove the Front Bumper of the Peugeot 308?
Peugeot 308 (2007-2014 / T7, MK 1) To remove the front bumper of the Peugeot 308, open the bonnet to access the screws securing the bumper from the top. Once these screws are loosened,…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos