Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Golf
    4. : How do you replace the heating radiator of the Volkswagen Golf?

Volkswagen Golf - Video tutorial

Model: Volkswagen Golf Golf 3, Golf III, MK 3 - Years 1991-1997
Part: Passenger compartment heating radiator
Operation: How do you replace the heating radiator of the Volkswagen Golf?

In order to disassemble the heating radiator of the Volkswagen Golf, you need to completely remove the lower part of the dashboard located next to the pedals: once this panel is removed, it will be possible to proceed by locating the heating radiator in the lower part of the dashboard. Loosening its fixing screws and disconnecting the fluid pipes, it will be possible to remove the old radiator and insert the new one. The new radiator must be properly fixed and connected, ensuring that everything is functioning correctly.


Posted on 4 May 2024 by ScegliAuto

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the hot air in the Volkswagen Golf 7 not work? Read Answer
    • Golf 2012-2019 - Why is the Golf 7 heating not working? Read Answer
    • Golf 2008-2012 - If my Volkswagen Golf 6 has heating problems, what could be the cause? Read Answer
    • Golf 2012-2019 - What problems could there be with the heating radiator on the Volkswagen Golf 7? Read Answer
    • Golf 2012-2019 - Why doesn't the heating of a Golf 7 work? Read Answer
    • Golf 2012-2019 - What to do if problems with hot air occur on a Volkswagen Golf 7? Read Answer
    • Golf 2012-2019 - What to do when the Volkswagen Golf 7 has a heating problem? Read Answer
    • Golf 2008-2012 - Why doesn't hot air work on a Volkswagen Golf? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos